PirateMX PowerSports
Log in
ATV & UTV

ATV Exhaust Parts: Match the Part to Your Machine and Repair

Choose ATV exhaust parts by exact machine fitment, system type, materials, mounting hardware, and whether a new or used OEM part suits the repair.

6 min read
ATV Exhaust Parts: Match the Part to Your Machine and Repair
In this guide (7)
  1. Identify the exhaust part your repair calls for
  2. Confirm fitment for your exact ATV before choosing a part
  3. Choose a full system, slip-on or service part
  4. Compare material, finish, heat contact and dimensions
  5. Check what is included and what must match
  6. Choose new aftermarket or used OEM
  7. Compare brands after part type and fitment

Choose ATV exhaust parts by matching the failed component to your exact quad before comparing materials, brands or complete systems.

Then verify the year, make, model and configuration on the product page, along with dimensions, mounting points, included hardware and compatibility with the exhaust already installed.

Identify the exhaust part your repair calls for

Name the failed piece first. ATV Exhaust Parts can mean a replacement pipe or muffler assembly, a slip-on silencer, a full system or a smaller service component attached to the exhaust.

Match the repair wording to the part type on the product page: header pipe, muffler, pipe-and-muffler assembly, slip-on silencer, end cap, gasket, spring, tip, spark arrestor kit or heat shield. Shape is not enough.

The FMF Replacement End Cap Kit CF for Factory 4.1 Exhaust is a carbon fiber end cap made for specified FMF Factory exhaust families. It does not replace a complete muffler.

The Yosh RS-2 Exhaust Muffler Spark Arrestor Kit is another service piece, while the Vertex Exhaust Gasket Kit is identified for exhaust gasket use. Each handles a different repair.

If the whole assembly needs replacement, compare complete ATV Exhaust Systems & Parts. When only one damaged or missing piece needs attention, stay with that component before comparing material, finish or brand.

Shop the parts

Exhaust Parts

Confirm fitment for your exact ATV before choosing a part

Start with the ATV's make, model, year and configuration, including its submodel where applicable. Check fitment for your exact year, make and model before you order.

Shape alone proves nothing. Use the make pages for Polaris Exhaust Parts, Yamaha Exhaust Parts, Honda Exhaust Parts, Suzuki Exhaust Parts, Kawasaki Exhaust Parts and Arctic Cat Exhaust Parts as starting points, then make the final decision from the fitment chart on the individual product page.

Confirm that the page names the exact component being replaced, not merely an Exhaust Parts category or a familiar brand. For a machine-specific pipe or muffler, compare mounting points, connection locations and any stated dimensions or outlet measurements with the part coming off the quad.

Look closely at the routing, too. If the page does not provide a fitment detail or measurement needed to confirm the match, ask PirateMX before ordering.

Choose a full system, slip-on or service part

  • Full Exhaust Systems: Choose one only when it includes the complete system you plan to replace and is made for your machine. This job disturbs more joints and mounts than a small service repair.
  • Slip On Exhausts: Choose one only when it is identified as a slip-on and its inlet, connection and mounts match the exhaust sections staying on the ATV.
  • Header pipe, muffler or assembly: Replace the exact section named in the repair when the rest of the exhaust can remain in place.
  • Service part: An end cap, gasket kit, spring pair, exhaust tip, spark arrestor kit or repack kit must match the exhaust component it services.

The Pro Circuit Factory SS Slip On Sound Silencer page identifies that product as a slip-on with a round muffler body. That description applies to this silencer. It is not a universal connection.

A header pipe solves a different problem than a loose end cap or leaking gasket. Buy only the scope of parts the repair needs.

Compare material, finish, heat contact and dimensions

Material matters after fitment is settled. Parts in this category include steel, stainless steel and aluminum, while some named guards and end caps use carbon fiber.

For ATV Exhaust Mufflers, read the construction details for the exact product. The MBRP Stainless Steel Performance Muffler Exhaust Tail Pipe Silencer page states stainless steel, describes 304 stainless and ceramic-coated materials, and gives a muffler size of 4.5 inches.

The same MBRP page says that product is lighter than stock and requires no clutching. Those statements belong to that muffler only.

The Pro Circuit Factory SS Slip On Sound Silencer page describes a brushed 6061 T-6 aluminum housing, a 304 stainless steel intake tube, a stainless steel slash-cut end cap and a round body. None of those specifications replaces the connection and mounting checks.

Heat contact calls for a different comparison. The Moose Universal Pipe Guard in Heat Shields & Mounts is black carbon fiber, has a length of 6 inches and comes with mounting hardware for a 4-stroke exhaust.

Its page says the guard helps prevent pants and boots from melting against the hot section it covers. It does not make the full pipe safe to touch or serve as an impact guard.

Small measurements can stop a repair cold. The Yosh RS-2 Exhaust Muffler Spark Arrestor Kit has a stated outlet diameter of 1.5 inches, which must match the intended RS-2 component.

Check what is included and what must match

Read what is in the box. A kit with the required fasteners can save a separate hardware search, while a bare component may rely on usable pieces already on the quad.

The FMF Replacement End Cap Kit CF for Factory 4.1 Exhaust includes the end cap, 3/16-inch stainless steel rivets and strap mounts that secure the cap to the canister. That hardware is for this kit.

Its product page specifies use with FMF Factory 4.1, Factory 4.1C and Factory RCT exhausts. Treat those named families as a required compatibility check, not a claim that the kit fits every FMF muffler.

The Moose Universal Pipe Guard includes mounting hardware and is intended for 4-stroke exhaust. Compare its shape and covered area with the hot section before choosing it as the right heat shield and mount.

At Exhaust Header Pipes and other joined sections, the gasket and spring must suit the components being connected. The Vertex Exhaust Gasket Kit page identifies its application as exhaust, but that detail alone does not confirm the machine or joint.

Repack kits, tips and spark arrestor kits need the same care. Match the named muffler family and every stated dimension, then ask PirateMX before ordering if the product page leaves a required detail unclear.

Choose new aftermarket or used OEM

PirateMX ATV Exhaust Parts include new aftermarket components and used OEM parts removed from machines PirateMX took apart itself. The individual product page tells you which type you are considering.

Choose a new aftermarket part when its application, connections, construction and included hardware match the repair. A used OEM pipe, muffler or mount can suit a rider who needs that original component from the correct machine application.

Each used OEM exhaust part is a single part from one teardown, not a repeat stocked item. Read the part note for its condition.

Then compare the machine application and exact component with the repair in front of you. If the note does not answer a condition concern, ask PirateMX before ordering.

Inspect early before trail riding, hunting season, plowing or work around the property. Let the exhaust cool first.

Look for loose mounts, missing springs, rattling heat shields, damaged guards, dents and soot around joints. A quad that lives outside through wet winter weather also deserves a close look around connections and mounts for corrosion.

Finding the issue early keeps the choice clear. You can decide whether the machine needs hardware, a gasket, a service component or a larger replacement before the next job.

Compare brands after part type and fitment

Pick the brand last. Compare Moose Racing Exhaust Parts, Vertex Exhaust Parts and FMF Racing Exhaust Parts only after establishing the machine application and required component type.

A brand name cannot confirm fitment. Use the product page instead.

Moose Racing has a listed black carbon fiber pipe guard for 4-stroke exhaust, Vertex has an exhaust gasket kit, and FMF Racing has a replacement carbon fiber end cap kit for named Factory-series exhausts. These parts handle different jobs and are not interchangeable.

Compare each choice in this order: machine application, component type, compatibility with the current exhaust, dimensions, material and finish, included hardware, and the part note for used OEM. That keeps full systems, slip-ons and small repair components from being mistaken for interchangeable Exhaust Parts.

Shop the collections in this guide

Keep reading

All guides →