Select Your Vehicle
For Guaranteed Fit
Select Make
Select Year
Select Model
Select Sub Model
1 / 5
Dipstick|SKU #3087-342
Feuling Polished Aluminum Vented Dipstick
$301.18$305.05
NEW PART
Save $3.87 ($10.00%)
FREE Shipping
Buy Now, Pay Later with Easy EMI via Affirm on orders over $50. As low as 0% APR.
IN STOCKWI: 9+ NY: 9+ TX: 1 NC: 9
Expert Support
(304) 699-7572$301.18$305.05
Save $305.05
Description
The Feuling billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.
Features
- Screws into the factory oil fill spout as a stock replacement part on M-Eight baggers
- This breathing dipstick removes unwanted build-up of blow by, which is found in engines with excessive leakdown through the rings/cylinders which is a common issue with large displacement big bore engines
- Test results show a decrease in engine sump oil levels
- Two venting style options are available when installing dipstick
- Dipstick vents excessive pressure from the oil tank through a breather system consisting of a filter element and umbrella valve
- There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU)
- If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand)
- When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright)
- Made in the U.S.A.
- Two venting style options when installing dipstick: 1) Use the 1/8 NPT breather vent fitting with internal porous filter element (this option gives a clean look; however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by). 2) Use quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, but does requires disconnecting the fitting in order to check the oil). For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.
- The oil pick-up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
Specifications
Condition
New
SKU#
3087-342
Part
Dipstick
Dipstick Type
Oil
Material
Aluminum
Base Color
Silver
Surface Finish
Polished
Sold in Units of
Each
FitmentHarley Davidson Street Glide CVO FLHXSE, Ultra Limited Electra Glide FLHTK, Tri Glide Ultra Classic FLHTCUTG, Road King Special FLHRXS, Road Glide FLTRX, Police FLTRXP, Limited Edition FLTRK, Road Glide CVO FLTRXSE, Road Glide ST CVO FLTRXSTSE, Road Glide Custom CVO FLTRXSE, Electra Glide Police EFI FLHTPI, Street Glide EFI FLHXI, Road Glide Custom FLTRX, Road Glide Special FLTRXS, Street Glide Special FLHXS, Road Glide ST FLTRXST, Street Glide ST FLHXST, Freewheeler FLRT, Tri Glide CVO FLHTCUTGSE, Electra Glide EFI FLHTI, Revival, Road King EFI FLHRI, Ultra Limited CVO Electra Glide FLHTKSE, Ultra Limited Low Electra Glide FLHTKL, Road Glide Ultra Ultra FLTRU, Electra Glide Ultra Classic EFI FLHTCUI
Vehicle Compatibility
Search to verify this part fits your vehicle
Year
Make
Model
Action
2017
Harley Davidson
Road Glide Special FLTRXS
2017
Harley Davidson
Street Glide Special FLHXS
2017
Harley Davidson
Freewheeler FLRT
2017
Harley Davidson
Street Glide CVO FLHXSE
2017
Harley Davidson
Ultra Limited CVO Electra Glide FLHTKSE
Brand Details
Feuling Oil Pump Corp.™ has pioneered and developed the technology behind some of the fastest land vehicle ever produced, designing the Oldsmobile™ Indy engine and licensing technology to major manufacturer such as Ford™, General Motors™, Harley-Davidson™, Chrysler™, Edelbrock™, and Nissan™ to name a few. If you want high speed performance parts that look good, from the designers of the fastest engines on the land, then you want Feuling™. Feuling Polished Aluminum Vented Dipstick is just one of the wide array of exhaust, engine, fuel intake, oil pump, and cam shaft parts that Feuling™ offers.
Similar Products You May Like
Used Similar Products You May Like
Customer Reviews
Real feedback from customers who purchased this specific product.
0.0
0 Reviews
5
0 (0%)
4
0 (0%)
3
0 (0%)
2
0 (0%)
1
0 (0%)
0 Reviews
Filter by:
Sort by: