UTV Windshields: Choose the Right Type and Fit

Choose UTV windshields by matching front or rear placement to your exact side by side first, then compare the design, material, mounts, roof clearance, and parts in the box.

A clear panel that looks close is not a fit check, and a used OEM windshield needs its own application and part-note review.

Choose Front or Rear Windshield Placement First

Start with the opening you need to close. The QB Windbreak Half Folding Windshield for KAF620M is a front windshield, while the Moose Utility Rear Back Dust Panel Clear Windscreen goes at the rear of the cab. Those panels are not interchangeable.

Half and full describe coverage. Folding and fixed describe how the panel operates, while rear panel tells you its position. Each term still has to match the vehicle application on the product page.

After identifying the position and your machine, compare the UTV windshields made for that combination.

Confirm Fitment for Polaris, Kawasaki, Honda, Can Am, or Yamaha

Start with the make, then match the exact model and application shown on the product page. Use the dedicated pages for Polaris windshields, Kawasaki windshields, Honda windshields, Can Am windshields, and Yamaha windshields to stay with the right machine family.

The QB Windbreak Half Folding Windshield for KAF620M and the QB Windbreak Half Folding Windshield for KAF 820 Pro-FX FXT show why the full application matters. Similar product names do not make those Kawasaki applications interchangeable.

Check fitment for your exact year, make and model before you order. Keep any submodel, crew configuration, roof, and cab setup in view as well. A clear finish, folding design, or similar-looking outline is not evidence that a windshield fits another side by side.

Match the Design and Material to the Product Details

For cold plow work, a full front panel blocks more direct wind and spray than a half windshield. A half design leaves more of the cab open, while a folding design can provide airflow without removing the whole panel. Folding hardware needs inspection, and a fixed panel must be removed when you want the front open. A rear panel is meant to reduce dust curling into the cab during trail riding.

Check the stated material on the exact product page. The QB Windbreak Half Folding Windshield for KAF620M, Moose Utility Rear Back Dust Panel Clear Windscreen, Moose Utility Deluxe Full Folding Windshield Wind Screen, Open Trail Tinted Rear Windshield, and Open Trail Gen 2 Folding Windshield WindScreen each state polycarbonate for that specific product.

Finish is product-specific too. The cited Quadboss front windshields and Moose Racing examples are clear. The Open Trail Tinted Rear Windshield has a gray base, while the Open Trail Gen 2 front windshield is clear.

Dimensions help confirm how a panel relates to the cab and roof. The Moose Utility Rear Back Dust Panel has a height by width of 20.5 by 54.25 inches and is 0.177 inch thick. The Moose Utility Deluxe Full Folding Windshield has a height by width of 30 by 50 inches. Do not carry dimensions, thickness, color, or placement from one product page to another.

Check Mounting, Roof Clearance, and Box Contents

Read the mounting method and what is in the box before ordering. The QB Windbreak Half Folding Windshield for KAF620M has a toolless installation and removal design, includes an upper filler panel for the gap between the cage and windshield, and requires partial assembly.

The Quadboss Folding Windshield includes mounting hardware and uses rubber-coated stainless steel mount strips on the roll cage. The Moose Utility Rear Back Dust Panel and Moose Utility Deluxe Full Folding Windshield are clamp-on designs.

Roof details need the same attention. The Moose Utility Deluxe Full Folding Windshield is designed to work with the OEM roof without leaving a large gap at the top. The Open Trail Gen 2 Folding Windshield has a similar OEM-roof note and mounts with p-clamps that wrap around the cage tubes. Do not assume either note applies to an aftermarket roof or another windshield.

Before plow or riding season, inspect the cage attachment areas and check the roof, mirrors, doors, cab panels, and other accessories for interference. Lay out the supplied hardware, complete any stated assembly, and operate a folding panel before heading out. Recheck clamps and hardware after the first trail ride or clearing job, following the maker's instructions.

Decide Between New Aftermarket and Used OEM

Choose new aftermarket when a Moose Racing, Quadboss, or Open Trail windshield matches the machine and provides the design and mounting package you need. Read the individual page because hardware, filler panels, assembly, and roof notes vary by product.

A used OEM windshield is a single part removed from one machine PirateMX took apart, not a repeatedly stocked item. Confirm its exact application, placement, and included mounting pieces. Read the note on that part's page for its stated condition.

Whether you choose new aftermarket or used OEM, keep the machine application and installation details together while comparing side-by-side windshields. If the page does not state a needed mounting or fitment detail, ask PirateMX before ordering.

Compare Moose Racing, Quadboss, and Open Trail Details

Compare these brands by the exact windshield page, not by the badge. Placement, material, finish, dimensions, mounting method, and included parts can change between applications.

• Moose Racing windshields: The cited choices include a clear rear polycarbonate panel and a clear-and-black front full-folding polycarbonate windshield. Check the rear product for its dimensions and thickness, and the front product for its clamp-on mount and OEM-roof note.
• Quadboss windshields: The cited choices include front folding and half-folding designs. The Quadboss Folding Windshield includes mounting hardware and roll-cage mount strips. The KAF620M half-folding windshield includes a filler panel, uses a toolless design, and needs partial assembly.
• Open Trail windshields: The cited tinted rear windshield is gray-base polycarbonate. The Gen 2 folding windshield is a clear front polycarbonate panel that mounts with p-clamps and is designed around the OEM roof.

Use the Moose Racing and Quadboss brand pages to compare the correct application. Review each Open Trail product page the same way. If material, finish, hardware, or roof compatibility is not stated, ask PirateMX rather than assuming another windshield's details apply.

Frequently asked questions

How much do UTV windshields cost?

UTV windshield cost depends on the exact machine, front or rear placement, half or full coverage, folding hardware, material, mounts and what comes in the box. A used OEM windshield is one part removed from one side by side, while new aftermarket choices vary by mounting package and design. Check the UTV windshield collection for current prices, then verify your exact year, make and model before ordering.