Choose dirt bike number plates by confirming machine fitment before color or material. For a front replacement, make sure the product page identifies the plate as a front-position part made for your exact bike.
Then check how it mounts, what it is made from, the unit quantity, and whether it is new aftermarket or used OEM.
Confirm You Need a Dirt Bike Front Number Plate
This guide covers the replacement plate mounted at the front of the bike, not side bodywork or a graphics kit. The Orange White Front Number Plate page identifies its position as Front, placing it in the dirt bike Number Plates category.
Need several exterior pieces instead? A dirt bike Body Plastic Set may suit the repair better. Read what is in the box so you do not order a single front plate when the rest of the body plastic also needs replacement.
Confirm Fitment for Your Bike
Start with the make on your bike: KTM Number Plates, Honda Number Plates, Yamaha Number Plates, Kawasaki Number Plates, Husqvarna Number Plates, or GAS GAS Number Plates. That only narrows the search.
Open the individual product page and compare its machine information with your dirt bike. A plate made for the correct brand is not automatically made for every model from that brand.
Check fitment for your exact year, make and model before you order.
Check Mounting, Material, and the Stated Unit
After confirming fitment, look at the details that affect installation. The Orange White Front Number Plate is polypropylene, and its color and base color are Orange and White.
Do not assume every plate uses the same holes or lower mounting points. This product has pre-drilled pieces intended to mount at stock locations.
The unit reads Each. Its page also describes dual-injected, synthetic rubber lowers. Those details belong to the Orange White Front Number Plate and should not be applied to other front plates unless their product pages say the same.
If a page does not state the material, mounting setup, color, or unit quantity, ask PirateMX before ordering.
Choose New Aftermarket or a Used OEM Part
Choose new aftermarket when the product page identifies the plate that way and its mounting setup suits your repair. A used OEM plate can be the better choice when the individual part removed from a machine is what you need.
Every used OEM number plate from a PirateMX teardown is a single part from that machine, not a repeat stocked item. Read the part note on its page before ordering. Another used plate that looks the same may not become available or carry the same note.
Compare Each Plate Before Ordering
Compare what each product page says about front position, color and base color, material, mounting, and unit quantity. Fitment and mounting come before color.
PirateMX stocks Acerbis Number Plates in this category, and most of the front plates here are from that brand. Still, each product stands on its own. Do not carry the Orange White Front Number Plate's material, pre-drilled mounting, unit quantity, or rubber-lower details over to a different plate without checking its page.
Frequently asked questions
Can I use number plate stickers on a dirt bike?
Yes, but number plate stickers are graphics, not a replacement for the front number plate. Make sure the sticker or graphics kit is cut for your specific plate, since plate shapes and mounting setups are not all the same. If the plastic itself is cracked, missing, or will not mount correctly, replace the plate before applying graphics.
Are vintage dirt bike number plates different from current dirt bike number plates?
Treat vintage and current dirt bike number plates as different unless the product page confirms the same fitment. Even plates for the same brand can differ by model, year, shape, and mounting setup. Check fitment for your exact year, make and model before you order, then compare the mounting points and front position shown on the product page.
