PirateMX PowerSports

Select Your Vehicle

For Guaranteed Fit

Select Make
Select Year
Select Model
Select Sub Model
Feuling Polished Aluminum Vented Dipstick
1 / 6
Dipstick|SKU #3095-342

Feuling Polished Aluminum Vented Dipstick

OUT OF STOCK

This item is currently unavailable. Get notified when it's back in stock.

$311.41$326.05
NEW PART

Save $14.64 ($10.00%)

FREE Shipping

    Buy Now, Pay Later with Easy EMI via Affirm on orders over $50. As low as 0% APR.

    OUT OF STOCK

    Description

    The Feuling billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve. Feuling vented dipsticks screw into the factory oil fill spout as a stock replacement part. These breathing dipsticks remove unwanted build-up of blow by pressure in the oil tank.

    Features

    • Screws into the factory oil fill spout as a stock replacement part on M-Eight baggers
    • This breathing dipstick removes unwanted build-up of blow by, which is found in engines with excessive leakdown through the rings/cylinders which is a common issue with large displacement big bore engines
    • Test results show a decrease in engine sump oil levels
    • Two venting style options are available when installing dipstick
    • Dipstick vents excessive pressure from the oil tank through a breather system consisting of a filter element and umbrella valve
    • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU)
    • If reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand)
    • When reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright)
    • Made in the U.S.A.
    • Two venting style options when installing dipstick: 1) Use the 1/8 NPT breather vent fitting with internal porous filter element (this option gives a clean look; however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by). 2) Use quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, but does requires disconnecting the fitting in order to check the oil). For option 2, we recommend routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail.
    • The oil pick-up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

    Specifications

    Condition
    New
    SKU#
    3095-342
    Part
    Dipstick
    Dipstick Type
    Oil
    Material
    Aluminum
    Surface Finish
    Polished
    Sold in Units of
    Each
    Base Color
    Silver
    Features
    Polished Cap

    Vehicle Compatibility

    Search to verify this part fits your vehicle

    Year:2004
    Make:Harley Davidson
    Model:Road King Custom FLHRS
    Action:View
    Year:2001
    Make:Harley Davidson
    Model:Electra Glide Standard FLHT
    Action:View
    Year:2000
    Make:Harley Davidson
    Model:Road King Classic EFI FLHRCI
    Action:View
    Year:1994
    Make:Harley Davidson
    Model:Electra Glide Classic FLHTC
    Action:View
    Year:2003
    Make:Harley Davidson
    Model:Road King FLHR
    Action:View
    Year:2006
    Make:Harley Davidson
    Model:Road King Classic EFI FLHRCI
    Action:View

    Brand Details

    Feuling Oil Pump Corp.™ has pioneered and developed the technology behind some of the fastest land vehicle ever produced, designing the Oldsmobile™ Indy engine and licensing technology to major manufacturer such as Ford™, General Motors™, Harley-Davidson™, Chrysler™, Edelbrock™, and Nissan™ to name a few. If you want high speed performance parts that look good, from the designers of the fastest engines on the land, then you want Feuling™. Feuling Polished Aluminum Vented Dipstick is just one of the wide array of exhaust, engine, fuel intake, oil pump, and cam shaft parts that Feuling™ offers.

    Similar Products You May Like

    Used Similar Products You May Like

    Customer Reviews

    Real feedback from customers who purchased this specific product.

    0.0

    0 Reviews

    5
    0 (0%)
    4
    0 (0%)
    3
    0 (0%)
    2
    0 (0%)
    1
    0 (0%)

    0 Reviews

    Filter by:
    Sort by: